Gear Pump ( gear oil pump, hydraulic gear pump)

We produce Gear Pump ( gear oil pump, hydraulic gear pump)

Gear Pump (Hydraulic Pump,external gear pump,hydraulic gear pump,small gear pump, mini gear pump,High pressure gear pump)

We produce Gear Pump ( gear oil pump, hydraulic gear pump)

Model MRGP-F20 is an all aluminium construction or with iron cover, high pressure Hydraulic Gear Pump with 9 displacement sizes from 0.24 to 1.52 cu.in/rev. (4 to 25 cm3/rev).The standard mounting fl ange is SAE A 2 bolt, standard ports are SAE-12 inlet and SAE-10 outlet. The standard drive shaft is a 5/8 inch diameter straight with 5/32 straight key. Optional shafts include an S9-SAE 9 tooth spline and a 3/4 inch dia. straight with a 3/16 straight key available on special request.

But all those displacement, pressure, rotate speed, flange, ports, and shaft can be customized as your requirements.

Model	Displacment		Pressure		Speed RPM
	cu.in/rev	cm3/rev	PSI	Mpa	Rated	Max
MRGP-F20-04	0.24	4	3625	25	2000	3600
MRGP-F20-06	0.36	6	3625	25	2000	3600
MRGP-F20-08	0.48	8	3625	25	2000	3600
MRGP-F20-10	0.61	10	3625	25	2000	3600
MRGP-F20-12	0.73	12	3625	25	2000	3600
MRGP-F20-14	0.85	14	3625	25	2000	3600
MRGP-F20-16	0.97	16	3625	25	2000	3600
MRGP-F20-20	1.22	20	3625	25	2000	3600
MRGP-F20-25	1.52	25	3625	25	2000	3600

Recommended working conditions:1. FILTRATION 25 micron or better2. OIL VISCOSITY 6 to 200 cSt3. INLET PRESSURE 12 to 32 psi abs.4. OIL TEMPERATURE -25 to 80 degrees C(-12 to 175 degrees F).5. AMBIENT -22 to 55 degrees C(-8 to 130 degrees F).

Flow rate=Displacement (cu.in/rev) X speed (rpm)

If you want to know more about them, including the sizes, pls contact us.

Gear Pump ( gear oil pump, hydraulic gear pump)